Skip to content
The inside of an open electrical enclosure, circuit breakers and colour coded wiring landed on terminal blocks

Division 03 · Sensors

Most machines run unmeasured.

A pump, a fan, a gearbox, a mill, a wheel. Every machine tells you when it is going wrong. Hearing it properly used to mean running a cable to it, and the cable costs more than the machine earns. We listen without the cable.

Hears the whole machine · Sealed against dust and water · No batteries to change

Everything

We send everything the machine says

Every angle

Movement measured in every direction at once

No batteries

The machine’s own movement powers the sensor

Sealed

Dust, mud and high pressure hosing

Why most machines go unmeasured.

A wired sensor hears everything, and you pay for every metre of cable. A cheap wireless sensor is affordable, and all it sends is one average reading.

So about five machines in a hundred are properly listened to. Most breakdowns happen in the other ninety five.

What our sensor does differently

It sends the whole sound of the machine, not an average of it. That matters, because a failing part shows up as a small sharp knock, and an average smooths the knock away. The sensor is sealed against dust and water, it sticks on with a magnet in minutes, and the machine’s own movement powers it, so there are no batteries to change.

You get an answer, not a graph

The sensor is only the way in. What you buy is a plain answer: which part is failing, roughly when it will fail, and how hard the machine is working. It arrives in the words and units your own reports already use, so nobody needs a specialist to read it.

  • The failing part named, or an honest “we do not know yet” when we are not sure
  • An estimated date for when it needs replacing
  • How hard the machine is working, read from the outside
  • Every reading tagged with the machine it came from

It already works in the worst places

A hundred of these sensors have been running for over two years in a heavy processing plant. Another set has run for three years without a break on equipment that shakes instruments to pieces. A university research group checked a measurement most engineers thought could not be taken at all.

What is inside the division

Hardware, platform, and a way onto the machine.

Three parts: the sensor itself, the software that reads it, and the ways it gets onto your machine.

01 · The sensor

Hardware

Hears the machine in every direction, sealed against dust and water, no battery. The same sensor fits every kind of machine.

02 · Unmined Intelligence

The platform

It listens at the machine, sends everything it hears without losing any of it, keeps track of which reading came from which machine, and turns what it hears into the name of the failing part.

03 · Three ways on

Fitting

Stick it on, build it into a spare part you already reorder, or have the machine supplier fit it. Nothing has to be shut down.

You pay for the result, not the kit. The cost comes out of the operating budget and is measured against something your plant already reports: output, uptime, yield or energy. The sensor can even arrive inside a spare part you reorder anyway, so nobody has to raise a capital request to get started. Why we price it this way

“We had precision on the compressor everybody watches and nothing at all on the four hundred machines that actually stop us.”
Maintenance manager, heavy process operator.

Next step

Start on the machine that hurts most.

Tell us which machine costs you the most in unplanned stoppages. We fit a sensor to it, tune it to your equipment, and report against a number you already track. Fitting takes minutes and nothing has to be shut down. The first job is a fixed price.